A feature-packed chainsaw with advanced engine technology at a value price.
The MS 211 uses advanced technology in the form of a powerful low-emission, fuel-efficient engine. But it doesn’t stop there. It also reduces your maintenance with a professionally inspired pre-separation air filtration system (extending air filter life up to five times longer).
STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
IntelliCarb™ Compensating Carburetor
The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
Side-Access Chain Tensioner
The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
STIHL chainsaws are equipped with a chain-stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
Ematic™ Lubrication System
The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%. Master Control Lever™
The Master Control Lever™ is an easy-to-use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
STIHL OILOMATIC Saw Chain
STIHL makes its own saw chains.
Includes a polymer ramp reservoir that holds bar oil until it can be picked up by a passing chain. This can reduce oil usage by up to 50%.
They help prevent pull-in and provide better control, making cuts easier.
Spark Arrester Muffler
Has large baffles which reduce noise levels and contain a screen designed to reduce the emission of sparks.
Front Hand Guard
Designed to reduce the risk of injury.
Designed for a secure grip and ergonomically angled for comfort.
Protected Spark Plug
Protected, yet easy to change.
Large Starting Handle
Easy to grip
Smooth Clean Design
Has no rough edges to snag on clothing or brush.
Air Filter Cover
Easy to remove for fast and easy filter cleaning or replacement.
Master Control Lever™
Is a single lever operating the choke, starting throttle lock and on-off switch.
Rear Hand Guard
Reduces the risk of injury as well as provides a wide area for foot placement during starting.
High-Tech Polymer Housings
Lightweight, withstand greater impact, and are corrosion-resistant.
Translucent Fuel Tank
Allows operator to easily check fuel level before starting work.
Helps reduce operator fatigue.
Provides easier starting and smoother running.
Replaceable “In Tank” Fuel and Oil Filters
Lower cost and are easy to maintain.
Inboard Chain Brake
Requires less maintenance and makes saw chain sprocket easier to remove.
Automatic Bar and Chain Oiler
Lets the operator concentrate on cutting, not bar lubrication.
Helps reduce the risk of operator contact by a chain if it should break or derail.
Throttle Trigger Lockout
Must be depressed before the trigger can be activated.
Other STIHL homeowner chainsaws
- STIHL MS 170
- STIHL MS 171
- STIHL MS 180
- STIHL MS 180 C-BE
- STIHL MS 181 C-BE
- STIHL MS 211 C-BE
- STIHL MS 250
- STIHL MS 251 C-BE
- STIHL MS 251 WOOD BOSS