A powerful professional chainsaw with a lightweight magnesium piston.
Designed for the most demanding tree care and forestry professionals, the STIHL MS 400 C-M is built with STIHL M-Tronic™ engine technology to deliver low-emission, fuel-efficient performance even under changing conditions. Unlike its aluminum piston-equipped counterparts, the advanced magnesium piston in the MS 400 C-M provides greater displacement, power and torque without additional weight. A long-life HD2 air filter means you simply clean it instead of replacing it, while a pre-separation system removes large debris before it even gets to the air filter, increasing run time between cleanings.
Adjustable Automatic Oiler
The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
This product features M-Tronic™ (M) – a new generation of Intelligent Engine Management that eliminates the low and high-speed carburetor adjustment screws, compensates for the dirty air filter, and changes in elevation and fuel quality for optimum engine power at all times.
Fuel and oil caps with retainers
The fuel and oil cap retainers keep the caps attached to the unit for added convenience.
Pre-Separation Air Filtration System
This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
Side-Access Chain Tensioner
The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
STIHL chainsaws are equipped with a chain-stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
Ematic™ Lubrication System
The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
Master Control Lever™
The Master Control Lever™ is an easy-to-use single lever, operating the choke, starting throttle lock and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
The decompression valve also referred to as ‘deco’ or ‘deco valve’, vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
The Winter/Summer Shutter allows the carburetor to operate at optimum temperature year-round and helps to prevent carburetor icing when working below 50°F (10°C).
Magnesium Alloy Piston
The magnesium alloy piston is lighter in weight than equivalent size aluminum-alloy pistons.Excellent power-to-weight ratio (12.8 lbs./5.4 bhp)
Thanks to innovative engineering and construction, the MS 400 C-M delivers an excellent power-to-weight ratio.
The modern design of the MS 400 C-M is an aesthetic reflection of the power and innovation this saw delivers.
Lightweight (12.8 lbs.)
The MS 400 C-M professional chainsaw is designed to deliver lightweight performance and job site productivity.
STIHL OILOMATIC Saw Chain
STIHL makes its own saw chains.
Includes a polymer ramp reservoir that holds bar oil until it can be picked up by a passing chain. This can reduce oil usage by up to 50%.
They help prevent pull-in and provide better control, making cuts easier.
Spark Arrester Muffler
Has large baffles which reduce noise levels and contain a screen designed to reduce the emission of sparks.
STIHL Quickstop® Chain Brake System
Designed to stop the chain in fractions of a second. Can be manually activated by inertia if the kickback force is sufficient.
Front Hand Guard
Designed to reduce the risk of injury.
Designed for a secure grip and ergonomically angled for comfort.
Protected Spark Plug
Protected, yet easy to change.
Large Starting Handle
Easy to grip.
Smooth Clean Design
Has no rough edges to snag on clothing or brush.
Air Filter Cover
Easy to remove for fast and easy filter cleaning or replacement.
Master Control Lever™
Is a single lever operating the choke, starting throttle lock and on-off switch.
Rear Hand Guard
Reduces the risk of injury as well as provides a wide area for foot placement during starting.
High-Tech Polymer Housings
Lightweight, withstand greater impact, and are corrosion-resistant.
Translucent Fuel Tank
Allows operator to easily check fuel level before starting work.
Helps reduce operator fatigue.
Provides easier starting and smoother running.
Replaceable “In Tank” Fuel and Oil Filters
Lower cost and are easy to maintain.
Inboard Chain Brake
Requires less maintenance and makes saw chain sprocket easier to remove.
Automatic Bar and Chain Oiler
Lets the operator concentrate on cutting, not bar lubrication.
Helps reduce the risk of operator contact by a chain if it should break or derail.
Throttle Trigger Lockout
Must be depressed before the trigger can be activated.
Other STIHL Professional Chainsaws
- STIHL MS 261
- STIHL MS 261 C-M
- STIHL MS 362
- STIHL MS 362 C-M
- STIHL MS 362 R C-M
- STIHL MS 462 C-M
- STIHL MS 462 R C-M
- STIHL MS 500i
- STIHL MS 500i R
- STIHL MS 661 C-M MAGNUM
- STIHL MS 661 MAGNUM
- STIHL MS 661 R C-M MAGNUM
- STIHL MS 661 R MAGNUM
- STIHL MS 880 MAGNUM
- STIHL MS 881 MAGNUM
- STIHL MS 881 R MAGNUM