STIHL MS 211 C-BE Review

A value-priced chainsaw with advanced engine technology, our Easy2Start™ system, and the STIHL Quick Chain Adjuster.

What do you get when you combine a hardworking chainsaw with easy-to-use features? You get the STIHL MS 211 C-BE. This chainsaw takes all the low-emission and air-filtration technology of the MS 211 and joins it with two of our most popular comfort features: STIHL Easy2Start™, a system that starts the engine with just a light pull on the cord. Next is our Quick Chain Adjuster, which allows you to adjust the chain without tools. Now you can get power and comfort in one high-tech chainsaw. If you’re a homeowner who wants it all, STIHL has heard your call.

Features

STIHL Easy2Start™ (E)

The STIHL Easy2Start™ system makes starting STIHL outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start.

IntelliCarb™ Compensating Carburetor

The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.

Quick Chain Adjuster (QCA) (B)

The Quick Chain Adjuster (QCA) (B) allows the user to adjust the tension of the chain without the use of tools. This allows for easy chain adjustment.

Winter/Summer Shutter

The Winter/Summer Shutter allows the carburetor to operate at optimum temperature year-round and helps to prevent carburetor icing when working below 50°F (10°C).

STIHL OILOMATIC Saw Chain

STIHL makes its own saw chains.

Ematic™ Bar

Includes a polymer ramp reservoir that holds bar oil until it can be picked up by a passing chain. This can reduce oil usage by up to 50%.

Bumper Spikes

They help prevent pull-in and provide better control, making cuts easier.

Spark Arrester Muffler

Has large baffles which reduce noise levels and contain a screen designed to reduce the emission of sparks.

STIHL Quickstop® Chain Brake System

Designed to stop the chain in fractions of a second. Can be manually activated by inertia if the kickback force is sufficient.

Front Hand Guard

Designed to reduce the risk of injury.

Front Handle

Designed for a secure grip and ergonomically angled for comfort.

Protected Spark Plug

Protected, yet easy to change.

Large Starting Handle

Easy to grip

Smooth Clean Design

Has no rough edges to snag on clothing or brush.

Air Filter Cover

Easy to remove for fast and easy filter cleaning or replacement.

Master Control Lever™

Is a single lever operating the choke, starting throttle lock and on-off switch.

Rear Hand Guard

Reduces the risk of injury as well as provides a wide area for foot placement during starting.

High-Tech Polymer Housings

Lightweight, withstand greater impact, and are corrosion-resistant.

Translucent Fuel Tank

Allows operator to easily check fuel level before starting work.

Anti-vibration system

Helps reduce operator fatigue.

Electronic Ignition

Provides easier starting and smoother running.

Replaceable “In Tank” Fuel and Oil Filters

Lower cost and are easy to maintain.

Inboard Chain Brake

Requires less maintenance and makes saw chain sprocket easier to remove.

Automatic Bar and Chain Oiler

Lets the operator concentrate on cutting, not bar lubrication.

Chain Catcher

Helps reduce the risk of operator contact by a chain if it should break or derail.

Throttle Trigger Lockout

Must be depressed before the trigger can be activated.